KIT,FRONT,CIVIC,OEM,240mm,ROAD RACE 11.00 RTR,GT72,SPEC37,FDL/ST,ANO,W/LINES
Disclaimer: Wheel fitment is the customer's responsibility. If you need help verifying wheel fitment be sure to ask our brake experts for a wheel fitment template before you order. BBK's are not returnable due to improper wheel fitment.
The Wilwood Forged Dynalite Big Brake Kit is designed for use on vehicles with small bearing hubs and OE spindles that originally used 240mm / 9.45” rotors. In order to accommodate the larger brake package, 15” wheels with extra inner clearance are required. The kit's four-piston FDL/ST calipers are made of machined aluminum and hard anodized in medium gray. Durable hard anodizing resists wear and corrosion in the piston bores. Thermlock pistons decrease heat transmission from the pads, extending pad life and extending caliper body, fluid, and seal life. Internal damper springs and high-temperature piston seals ensure stable pedal height.
The components in this kit have been selected to deliver consistent start to finish performance on vehicles built for dedicated road course competition. No detail has been overlooked. Forged aluminum Dynalite/ST calipers, fortified with Thermlock® pistons and internal knock-back damping springs, provide high efficiency clamping force, unsurpassed heat management, and the piston retraction control that all contribute to a firm and consistent pedal through any event. Oversized 11" diameter Spec37 alloy GT series 72 vane two-piece rotor assemblies mount to the OE hub with aluminum hats adding overall system brake leverage, cooling capacity, and thermal stability in this compact yet sturdy weight saving configuration. The performance package is capped with high friction, high temperature, and long wearing Wilwood PolyMatrix H compound race pads. All premium grade fastener kits include rotor bolts and caliper to mount bracket bolts that are pre-drilled for safety lock wire. NOTES: This kit requires spindles from vehicles originally equipped with 240mm, 9.45" diameter rotors. On some models equipped with factory power brakes, upgrading to a larger bore master cylinder in the 15/16" to 1" range may be necessary. Vehicles converted to manual brakes typically have best results with a 3/4" or 13/16" bore master cylinder, all based on driver preference for travel and effort required. This kit has been verified for fitment in select 15 x 7" racing wheels configured to accommodate oversized brake packages. Interference may occur with wheels designed only around OE spec brake components. Please refer to the wheel clearance diagram to determine fitment with your specific wheels.
The Wilwood Forged Dynalite Big Brake Kit series is available in a variety of configurations for high-performance applications, and some models are equipped with a parking brake as standard. The series has been designed to meet the needs of both daily drivers and performance aficionados in equal measure. Various configurations, including classic, drag, and race, are available for either the front or rear axles. A wide range of 15-inch wheels will fit, and dust boots can be customized to provide protection from road debris. Muscle cars, dragsters, high-performance sports cars, and other vehicles are good fits for the Dynalite brake series.
