Redstuff Ceramic Low Dust Brake Pads; FMSI Pad No. D052; Vented; 5 Bolt Holes; 278mm Dia.; 52mm Height; 32mm Thick; 70.6mm Center Hole Dia.;
EBC Redstuff Ceramic Brake Pads are road legal, low dust brake pads specifically formulated for fast driving on street and prestige vehicles. But, they work great on vehicles with alloy wheels where dust would be an issue too. EBC Redstuff’s high friction formula helps improve the vehicle’s brake effect by up to 15%.
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
If you want to drive for weeks with clean wheels, then go for EBC’s Redstuff ceramic brake pads! These low dust pads are made using a combination of ceramic material and less aggressive aramid fiber, which is easy to wash off wheels and does not etch into alloy wheels. Aramid fiber is also a strong and heat-resistant synthetic material, which can stand up to temperatures up to 500 degrees Celsius. EBC’s Redstuff pads are guaranteed copper-free for environmental regulation, and they are fully ECE R 90 brake safety tested and approved for most vehicles.
The EBC Redstuff brake pads may be ideal for street performance, but they are also very much qualified for daily driving. Unlike other pad materials, these ceramic pads from EBC have very minimal rotor damage characteristics. And they are capable of repeated heavy brake use without falling off, thanks to the Nucap NRS hooks on backplates that help totally eliminate any pad debond. All EBC Redstuff brake pads come with a red “brake in’ surface coating for instant safe braking after installation. Also, a 1-year or 10,000-mile factory warranty comes with these pads for your total peace of mind.
