Loading...

Select your vehicle


Stoptech 129.33081.16 - Aero Disc Brake Rotor and Hat Pair, 2-Piece, Drilled

Previous image
Stoptech 129.33081.16 - Aero Disc Brake Rotor and Hat Pair, 2-Piece, Drilled
Next image
Zoom image

Stoptech 129.33081.16 - Aero Disc Brake Rotor and Hat Pair, 2-Piece, Drilled

Part No: 129.33081.16

Stoptech 129.33081.16 - Aero Disc Brake Rotor and Hat Pair, 2-Piece, Drilled

FLMN-129.33081.16
Vehicle Specific

Select your Vehicle

  • The unsprung and rotational mass has been reduced.
  • Better thermal capabilities
  • Heat dissipation is improved
  • Designed to work with original equipment calipers
  • Hats made of aircraft-grade aluminum are included.
  • Friction rings for AeroRotors have a proprietary internal vane design
  • Cross-drilled StopTech AeroRotors are offered in two configurations: slotted and cross-drilled.

Specs and ratings

Stopping Power
 
 
 
 
Noise Level
 
 
 
 
Performance Over Stock
 
 
 
 
Low
High

Product details


 Description

Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
StopTech AeroRotor - Black Hat - Single will improve your vehicle's overall heat capacity, allowing it to outperform stock performance. Because of this, you can apply more force to the brakes stop after stop while still having a lower probability of fading. All of this is accomplished without modifying your car's factory front-to-rear brake torque ratio. They will act to keep the pads from glazing while also adding additional bite, clearing away any debris that develops between the pad and the disc, as well as increasing the braking effectiveness in both wet and dry conditions!
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling. The directional, floating AeroRotors allow independent expansion of the rotor and hat without "coning," thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.
StopTech AeroRotor - Black Hat - Single is engineered to replace your vehicle's OE factory rotors while keeping the factory brake calipers in place. In addition to superior cooling, braking, and vehicle handling, the aero-rotors are available in the same diameter and thickness as your factory rotors This means the rotors have long drive pinholes. This means that the rotor and the top of the hat can be extended without "coning." AeroRotor friction rings with patent-protected internal vane design push up to 80% more air for enhanced cooling and minimal fade.

Airflow is optimized by pre-installing friction rings on billet aluminum AeroHats with directional stand-offs. Both parts are up to 8 lbs lighter than stock rotors and will not slow down your vehicle! The rotors are slotted or cross-drilled for better heat, friction material, and debris dissipation for clean contact between the pad and the rotor. The rotors can be electroplated with anti-corrosion zinc to protect them from salt and chemicals used in colder climates.

 Reviews

Customer reviews


 Specifications

Package
Attributes
  • Recommended Use
    OE Replacement
  • Driving Qualifiers
    Normal Commute, Performance Street
  • Budget
    High
  • Rotor Style
    Slotted, Cross-Drilled
  • Rotor Coating
    Non-coated
  • Rotor Treatment
    Non-Cryo Treated
  • Rotor Material
    Cast Iron
  • Stopping Power
    4 / 5
  • Noise Level
    2 / 5
  • Performance Over Stock
    Autocross/Commercial
Details
  • Part Name
    Disc Brake Rotor
  • ABS Tone Ring Included
    No
  • Bearings Included
    No
  • Center Hole Diameter
    68.000 mm
  • Disc Mounting
    Floating
  • Discard Thickness
    1.276 in
  • Mounting Bolt Hole Circle Diameter
    112.000 mm
  • Nominal Thickness
    1.339 in
  • Notes
    Vented Hat
  • Outside Diameter
    14.370 in
  • Overall Height
    2.067 in
  • Solid Or Vented Type Rotor
    Vented
  • Stud/Lug Hole Diameter
    0.598 in
  • Stud/Lug Hole Quantity
    5
  • Vane Style
    Curved
Manufacturer description
  • Manufacturer Label
    StopTech AeroRotors & Hat - 2 Piece Disc Brake Rotors

 Fast Shipping and Easy Returns


Customer satisfaction is our top priority. We want to ensure your experience with BuyBrakes.com is the best it can possibly be. If you're unsatisfied with your order and wish to return it, please follow our guidelines below.

Compatible with the following vehicles


Model Engine Trim Notes
2004, Audi RS6 Base Front Right
2004, Audi RS6 Base Front Right
2004, Audi RS6 Base Front Right
2004, Audi RS6 Base Front Right
2003, Audi RS6 Base Front Right
2003, Audi RS6 Base Front Right
2003, Audi RS6 Base Front Right
2003, Audi RS6 Base Front Right

Fitment Notice

You have not selected a vehicle to verify this product will fit. You may be subject to return and restocking fees if you order the wrong part without confirming your vehicle first.